Product Description
Details
General
Octofiber PVA is produced from pure PVA and is processed under the highest quality controls. This ensures a consistent product, with accurate printed objects as a result.
Printer compatibility
This 1.75mm product is compatible with most 1.75mm 3D printers. We have tested Octofiber on a variety of machines; delta printers, repraps and Felix to name a few. All with different dual hotends, and nozzle diameters. We are pretty sure that it will work with your machine if it looks like one listed below:
- Felix
- Printrbot
- Airwolf
- Cartesio
- Wanhao
- 3DBuilder
- Reprap
- Makerbot
- Velleman
Printing guidelines
The values below are a safe starting point to obtain good results, but may not be optimal for your printer. for example a delta printer can achieve much higher speeds than a direct drive would. Anyways, contact us if you cannot get it working.
Printer settingsPrinting speed | 30-60mm/s |
---|---|
Bed temperature | 55 °C |
Nozzle temperature | 180-200 °C |
Use them as a starting point, optimal values for your specific printer may vary from the values shown above, depending on e.g. nozzle diameter, exact printing speed and layer height to name a few.
PVA has the tendency to become more viscous if it is kept on high temperature while being idle. So if your printer can lower the idle temperature for the PVA nozzle, you are advised to use it.
Bed adhesionMany strategies are possible to get Octofiber PVA properly to your print-bed: clean glass, blue painters tape, glue stick, hairspray, special 3D printing stickers. Whichever option you choose, a heated bed is not necessary, but will further simplify good adhesion.
Additional Information
Additional Information
EAN13 | 8718692310308 |
---|---|
Filament diameter | 2.85mm |
OctofiberColor | Natural |
Material | PVA |
SKU | 285.pva.050.nat.001 |
Weight | 1.1000 |
Status | Enabled |